We present here a small but high quality range of steam related fittings which otherwise can only rarely or not at all be found in a similar quality.
KRAMER Pressure Gauges
Pressure Gauges are not only necessary and useful but also draw the eye.
Thats way Pressure Gauges should not only be of high technical quality and reliable but should also have the same visual aesthetics as their historic counterparts.
Our in Europe manufactured Pressure Gauges full fill all these requirements.
We offer our Pressure Gauges in three sizes:
KRAMER Pressure Gauge SMALL
- Diameter: 1/2“ (12.7mm)
- Pressure range: 0 – 6 Bar
- Threaded: 5 BA
- Nut & Nipple: Included
Price KRAMER Pressure Gauge SMALL:
KM1 Pressure Gauge SMALL: CHF 88.–
KRAMER Pressure Gauge MEDIUM
- Diameter: 3/4“ (19mm)
- Pressure range: 0 – 6 Bar
- Threaded: M5 x 0.5mm
- Nut & Nipple: Included, for 2mm pipe
Price KRAMER Pressure Gauge MEDIUM:
KM2 Pressure Gauge MEDIUM: CHF 68.–
KRAMER Pressure Gauge LARGE
- Diameter: 1“ (25.4mm)
- Pressure range: 0 – 8 Bar
- Threaded: M5 x 0.5mm
- Nut & Nipple: Included, for 2mm pipe
Price KRAMER Pressure Gauge LARGE:
KM3 Pressure Gauge LARGE: CHF 72.–
KRAMER RC-Steam Valve
With the RC-Steam Valve, designed for use with RC-equipement, you have sensitive control over the amount of steam released to the engine and therefore its power output.
For engines with D-valves like the GRAHAM TVR1A or the SAITO’s such a valve is indispensable.
With our own CRISTAL Engines this valve is already included as standard accessory.
In contrast to many other offerings our RC-Steam Valve is very compact and sealed to the outside, so non of that constant dripping seen so often!
Not only that, it is also very tight inside to, that means that when the valve is closed the engine does indeed stop!
We achieve this by intelligent choice of materials and a high degree of precision.
- The body is machined from brass.
- The moveable part is made from stainless steel and is ground in to the valve-body.
- To the outside the valve is sealed with O-rings.
- Suitable for engines with a cylinder bore up to 12mm – 13mm (1/2”)
- Nuts & cones for 4mm (5/32”) are included.
- Upon demand we can also supply cones for smaller pipes like 3.5mm or 3mm.
We recommend to fit the RC-Steam Valve between engine and Oiler / boiler so that the valve is constantly lubricated.
Price KRAMER RC-Steam Valve:
KV-RC RC-Steam Valve: CHF 68.–
KRAMER Displacement Lubricator
Our Displacement Lubricator is equipped with cooling ribs to ascertain proper condensation within the oiler.
- Suitable for engines with a cylinder bore up to 12mm – 13mm (1/2”)
- Nuts & cones for 4mm (5/32”) are included.
- Upon demand we can also supply cones for smaller pipes like 3.5mm or 3mm.
Price KRAMER Displacement Lubricator:
KV-L Displacement Lubricator: CHF 51.–
KRAMER Combination RC-Valve & Oiler
It is possible to combine the RC-Steam Valve and the Displacement Lubricator with a short coupling pice to an compact and good looking unit.
- Suitable for engines with a cylinder bore up to 12mm – 13mm (1/2”)
- Nuts & cones for 4mm (5/32”) are included.
- Upon demand we can also supply cones for smaller pipes like 3.5mm or 3mm.
The set RC-Steam Valve and Displacement Lubricator includes:
- 1 x KRAMER RC-Steam Valve
- 1 x KRAMER Displacement Lubricator
- 1 x Coupling piece
- Nuts & cones
We recommend to fit the unit in such a way that the RC-Steam Valve is placed between engine and Oiler so that the valve is constantly lubricated.
Price KRAMER Combination RC-Valve & Oiler:
KV-O Combination RC-Valve & Oiler: CHF 134.–